When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The Module (MicroSD Card Adapter) is a micro sd card render Module, Through the File System and the SPI Interface Driver, MCU TO COMPLETE THE FILE SYSTEM TO READ AND WRITE MICROSD CARD. Users Can Directly Use Ide Comes With Card To Complete The Library Card Initialization and Read-Write Control Interface: A Total of Six Pins (GND, VCC, MISO, MOSI, SCK, CS), GND TO GOUND, VCC is the Power Supply, Miso, Mosi, Sck is Spi Bus, CS is the chip Select Signal Pin; Level Conversion Circuit: Micro SD Card Into the Direction of the Signal is Converted to 3.3v, MicroSD Card Interface to Control The Direction of the Miso Signal is Also Converted Into 3.3v, General Avr Microcontroller System Can Read the Signal; Positioning Holes: 4 M2 Screws Positioning Hole Diameter IS 2.2mm, The Positioning of the Mo.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.