When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Tool Use Guideline: Remove pusher assembly using 3/4 inches socket. Pusher screw hex should touch body hex. Blow out any porcelain pieces and then insert puller housing. Insert puller screw and turn counterclockwise until tight. Make sure to engage as many threads as possible. It will turn hard. Use 7/16 inches socket. Put nylon gasket and left hand nut on puller screw. Tighten against puller housing. Using 15/16 inches socket. Turn nut counterclockwise to pull the broken spark plug tip from the hole. Use 15/16 inches socket. Blow out any porcelain before inserting new spark plug. When all of the porcelain comes out with the plug and only the tip is left in the hole, the pusher assembly steps can be skipped. .
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.