When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This pilot unloader check valve replaces the Hitachi part number 885426 for EC2510E Gas Compressors 110 - 140 PSI. The pressure setting on this valve can be adjusted by 30-40 psi up or down and is rated to handle 30 SCFM. They are used on both gas engines and electric motor compressors. The top inlet portion of the valve will connect to your main airline from your pump and is a 1/2" flare fitting. The bottom outlet will connect to your air receiver tank and is a 3/8" male NPT. The 1/8" Male NPT connection for the throttle control cable will connect to the throttle control port on the unloader. The Z bend tip of the throttle control cable will connect to the throttle arm on your engine.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.