When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Height Leveling Control Valve Kit Replaces for Freightliner Haldex KN27000
- Item No : 266212295166
- Condition : New
- Brand : switch-supplier
- Seller : switch-supplier
- Current Bid : US $26.48
-
* Item Description
- The length ratio L/A should be <=1.2 if the maximum Angle of motion is not exceeded 45°. Length L should be between 175 and 295mm. If shorter yaw bars are used, height valves will produce large air consumption. The Vehicle MUST be on level ground to start, and the brakes must be released. On most vehicles, you will need to measure from the bottom of the frame to the ground to obtain the proper starting height. You will need 34″ to 34 1/4″. Install wood dowels into the top and bottom of the leveling valve and then discharge the air. .
★ Recommended Products Related To This Item
♥ Best Selling Products in this category
