When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
|
|
|
Here are a few signs that your axle shaft needs to be replaced:
Fits:
BMW X5 E53 2001-2006 L6 3.0L Front Left
BMW X5 E53 2001-2006 V8 4.4L Front Left
BMW X5 E53 2000 V8 4.4L Front Left From 04/2000
BMW X5 E53 2002-2003 V8 4.6L Front Left
BMW X5 E53 2004-2006 V8 4.8L Front Left
Q: Can You Drive With a Bad CV Axle?
A: No. Do not ignore a bad CV axle. The vibrations you’re feeling and noise you’re hearing are a warning that it’s time for maintenance. If your axle fails while you’re driving, you could lose control of your car.
Q: How Long Should a CV Axle Last?
A: CV axles are usually covered by the manufacturer’s powertrain warranty, which should have you covered for at least four to five years and 50,000 to 60,000 miles. As for whether or not the axle makes it past the warranty period, there are many factors that can impact its lifespan. Driving over rough terrain where there are rocks and debris can shorten the life of a CV axle, because there are more opportunities to damage the rubber boot that protects the moving parts. The same goes for driving in snowy or icy conditions, where salt and sand can also damage the rubber. In some cases, the rubber just dries out and cracks, which has the same effect.
Q: What Does a Bad Axle Sound Like?
A: If you hear a clicking or grinding sound while turning, there’s a good chance your CV axle is starting to go. The noise may also be present while accelerating, but it’s most noticeable when turning the steering wheel.
Q: Can The CV Axle Damage My Transmission?
A: Yes, since it’s connected directly to the transmission, a failing CV axle can cause damage. Excessive movement from a damaged axle can wear components inside the transmission more quickly than they would normally.
How to Replace The CV Axle:
Professional installation is highly recommended!!
The procedure for replacing a CV axle will vary, depending on the year, make, and model of the vehicle.
The following are general guidelines for educational purposes only. Consult your vehicle’s factory information for specific repair instructions and recommended safety procedures.
1. Make sure the vehicle is in Park or that it is in gear with the parking brake set.
2. Jack up the car and remove the wheel on the side where you will be working.
3. Locate the axle nut. It will be in the direct center of the hub or wheel assembly where you removed the wheel.
4. Some vehicles have a cotter pin to secure the axle nut.You’ll need to remove it using pliers to straighten the pin so it can be pulled out.You can spray it with lubricant if it’s rusted or stuck.
5. Remove the axle nut.The wrench will help you safely remove the axle nut without having to use a pry bar.
6. Carefully remove the bolts holding the brake caliper brackets in place and remove the calipers. Instead of dropping the caliper to dangle on the brake line, use a carabiner or other small hook to support the caliper and keep pressure off the brake line.
7. Loosed the bolts holding the outer tie rod to the steering knuckle.If there’s another pin here, you’ll again need to use pliers to straighten it out.(In some cases, the steering knuckle and tie rod will not want to be separated. This will require a few light taps with a hammer or mallet.)
8. Remove the bolts holding the hub to the strut tower. You’ll need to keep the nut from turning while unbolting the hub.
9. Look further down the axle to see where it meets the transmission. Use your pry bar to pry the axle from the CV joint. You should be able to remove the axle at this point.You might see transmission fluid or have some leak while prying the axle. You may want to set up a pan or tray to catch the fluid.
10. Insert the new axle into the transmission where the old one was removed. You can use your mallet or a hammer wrapped in a towel to carefully coax the axle into position.
11. Attach the new axle to the hub and begin replacing the bolts you removed earlier in the process:
Hub/strut tower
Tie Rod/steering knuckle
Caliper
12. Replace the axle nut. Use an impact wrench if you have one to safely tighten the nut. If you don’t have one, get the nut as tight as you can without yanking on it while it’s up on stands.
13. Replace the wheel and lower the vehicle. (If you need to tighten the axle nut further, it’s best to do it with the vehicle on the ground, so that you can really push on a wrench or bar to tighten without worrying about the vehicle falling.)
Please Note:
Please pay attention to whether this CV Axle is suitable for your model
Item Specifics | |
---|---|
Brand | BYUSCarparts |
Manufacturer Part Number | 12436916 |
Manufacturer Warranty | 1 Year |
Quantity | 1 |
Fitment Type | Direct Replacement |
Part Type | CV Axle Assembly,CV Axle Shaft |
Surface Finish | Painted |
Non-Domestic Product | No |
Weight | 18LB |
Bundle Listing | No |
Material | steel |
Superseded Part Number | 31607565313.Z |
Interchange Part Number | 60-9255.Z |
Mounting Hardware Included | No |
Length | 23" |
Input Shaft Connection Style | Splined |
Output Shaft Connection Style | Spline |
Drive Type | AWD |
Transmission Type | Manual |
ABS Ring Included | No |
Axle Nut Locking Type | Stake |
Spindle Nut Included | Yes |
Modified Item | NO |
Vintage Part | NO |
Universal Part | NO |
If you have any question before buying the product, and any problem after getting the pacakge, do not hesitate to contact us.
2023 SALE Shop Category Excellent Delivery Picture Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Front Left CV Axle For BMW X5 3.0L 4.4L 2001-2006 BMW X5 4.8L 2004-2006
Here are a few signs that your axle shaft needs to be replaced:
Fits: BMW X5 E53 2001-2006 L6 3.0L Front Left Q: Can You Drive With a Bad CV Axle? A: No. Do not ignore a bad CV axle. The vibrations you’re feeling and noise you’re hearing are a warning that it’s time for maintenance. If your axle fails while you’re driving, you could lose control of your car.
Q: How Long Should a CV Axle Last? A: CV axles are usually covered by the manufacturer’s powertrain warranty, which should have you covered for at least four to five years and 50,000 to 60,000 miles. As for whether or not the axle makes it past the warranty period, there are many factors that can impact its lifespan. Driving over rough terrain where there are rocks and debris can shorten the life of a CV axle, because there are more opportunities to damage the rubber boot that protects the moving parts. The same goes for driving in snowy or icy conditions, where salt and sand can also damage the rubber. In some cases, the rubber just dries out and cracks, which has the same effect.
Q: What Does a Bad Axle Sound Like? A: If you hear a clicking or grinding sound while turning, there’s a good chance your CV axle is starting to go. The noise may also be present while accelerating, but it’s most noticeable when turning the steering wheel.
Q: Can The CV Axle Damage My Transmission? A: Yes, since it’s connected directly to the transmission, a failing CV axle can cause damage. Excessive movement from a damaged axle can wear components inside the transmission more quickly than they would normally.
How to Replace The CV Axle: Professional installation is highly recommended!! The procedure for replacing a CV axle will vary, depending on the year, make, and model of the vehicle. The following are general guidelines for educational purposes only. Consult your vehicle’s factory information for specific repair instructions and recommended safety procedures. 1. Make sure the vehicle is in Park or that it is in gear with the parking brake set. 2. Jack up the car and remove the wheel on the side where you will be working. 3. Locate the axle nut. It will be in the direct center of the hub or wheel assembly where you removed the wheel. 4. Some vehicles have a cotter pin to secure the axle nut.You’ll need to remove it using pliers to straighten the pin so it can be pulled out.You can spray it with lubricant if it’s rusted or stuck. 5. Remove the axle nut.The wrench will help you safely remove the axle nut without having to use a pry bar. 6. Carefully remove the bolts holding the brake caliper brackets in place and remove the calipers. Instead of dropping the caliper to dangle on the brake line, use a carabiner or other small hook to support the caliper and keep pressure off the brake line. 7. Loosed the bolts holding the outer tie rod to the steering knuckle.If there’s another pin here, you’ll again need to use pliers to straighten it out.(In some cases, the steering knuckle and tie rod will not want to be separated. This will require a few light taps with a hammer or mallet.) 8. Remove the bolts holding the hub to the strut tower. You’ll need to keep the nut from turning while unbolting the hub. 9. Look further down the axle to see where it meets the transmission. Use your pry bar to pry the axle from the CV joint. You should be able to remove the axle at this point.You might see transmission fluid or have some leak while prying the axle. You may want to set up a pan or tray to catch the fluid. 10. Insert the new axle into the transmission where the old one was removed. You can use your mallet or a hammer wrapped in a towel to carefully coax the axle into position. 11. Attach the new axle to the hub and begin replacing the bolts you removed earlier in the process: Hub/strut tower Tie Rod/steering knuckle Caliper 12. Replace the axle nut. Use an impact wrench if you have one to safely tighten the nut. If you don’t have one, get the nut as tight as you can without yanking on it while it’s up on stands. 13. Replace the wheel and lower the vehicle. (If you need to tighten the axle nut further, it’s best to do it with the vehicle on the ground, so that you can really push on a wrench or bar to tighten without worrying about the vehicle falling.)
Please Note: Please pay attention to whether this CV Axle is suitable for your model
Payment
![]() 1. We accept payment which is accpeted by ebay. All payment above the picture that is accepted.
2. Before making a payment, please make sure that your address has been verified and is up to date. After the checkout is complete, we cannot change any address.
3. Please make sure you submit your correct address! Shipping
1. Product will be shipped within 2 business days after full payment is received and verified.
2. Delivery Time is about 3-7 business days to most of countries.
3. All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
4. We ship the package to your shipping address in eBay instead of the one in PayPal or other payment address. Please tell us your shipping address if it is different from the one in eBay before we shipping the package.
5. The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
6. We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
Returns
1. Defective products can be fully exchanged or refunded within 30 days after you receive the goods.
2. Any return or exchanged items must be in brand new condition and cannot affect resale.
3. The buyer is responsible for paying the return shipping fee or exchange shipping fee if it's not our problem.
4. Please contact us via eBay email before returning or exchange.
5. We only define the product as defective when it does not match the description or quality issue, and it is the buyer's responsibility to understand the product description before bidding.
6. If it cannot be replaced or the buyer wants a refund and returns the original ones at his own expense, we will refund the purchase price.
7. Transportation and handling costs are not refundable.
8. Man-made damage caused by abuse or misoperation is not covered by the warranty.
About us
We are committed to sell good car parts, and provide professional customer service to our customers.
1. We have new products on the shelves every week, you can follow our shop at any time, and you can browse and select products in the shop if you need it.
2. We treat every buyer with a sincere heart. We believe that our sincere service and excellent quality will win your trust and support. You can contact us by leaving a message, and we will reply within 24 hours from Monday to Saturday you. (Does not include local holidays)
3.Vehicle fittings are provided by product manufacturers and therefore may not be exact. If you receive a product from us that does not fit your vehicle, please contact us and we will try to assist you in finding the correct part and setting up an exchange.
Note
If you have any question before buying the product, and any problem after getting the pacakge, do not hesitate to contact us. All rights reserved. |