When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Flow sensor / Volume flow sensor for water pipes, 1/2" thread, Arduino
- Item No : 254747090404
- Condition : New
- Brand : Paradisetronic.com
- Seller : www_paradisetronic_com
- Current Bid : US $12.14
-
* Item Description
- Your store for diy electronics Flow sensor / volume flow sensor for water pipes, 1/2 " For example, measure water consumption with your Arduino and the YF-S201C flow sensor. The module has two 1/2 "thread and can be cold or Hot water pipes are connected. The water flow is measured using a Hall sensor - this makes this sensor particularly durable. The flow can be evaluated on the yellow signal line using a microcontroller board. The river in l/min. With a tolerance of ± 3 %, it is calculated as follows: Frequency of the signal in Hz / 5 ≈ volume flow in l / min. Please note that the sensor should be attached vertically if possible and is not designed for temperatures of over 80˚C. Operating voltage: 5 - 18 V Maximum current recording: 15 mA at 5 V Maximum water pressure: 1.75 MPa Measureme.
★ Recommended Products Related To This Item
♥ Best Selling Products in this category
