When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It is conveniently fitted with a 2x4P 2.54mm female header the module is based on the USB-UART Bridge CH340 from WCH which is compatible with all platforms. You'll need to jumper GPIO 0 to GND when you plug into to your host to put the Board in programming mode (Remove jumper after you get the LED blue flash confirming programming mode has been enabled.).
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.