12V Automotive Fuse and Relay Box with Pre-Wires Fuse Relay Block Universal Fuse

• The fuse relay block has all the necessary wiring pre-wired, No need to install terminals and wiring harness later, Directly connect to the vehicle and avoid the hassle of wiring.
• You are not required to layout your electrical requirement or wire up the box. No more wiring nightmare!
• It is good for some people who didn't have some background knowledge in 12volt or know how to wire relays. It was time consuming to wire.

Corresponding Line Numbers Are Marked, Which Is Very Convenient For Your Installation.

• The Fuse and Relay Box there are two red wires coming from the same common buss bar,both going to the battery, you can also connect only one, depending on how you want to modify it, but connecting two can improve carrying capacity, a wiser choice.

NOTE: There are five different colors of wires in this fuse and relay box.

1. Positive input main wire (red): 11awg,
2. Positive output wire (yellow ):13awg,
3. Positive output wire (blue) :13awg,
4. Control wire(white) : 17awg,
5. Negative wire(black) :17awg

If You Take The Bottom Of The Panel Off You 'll See How They're Split Up.

• The fuse and relay box made of high quality flame retardant shell, Dustproof.
• Overall structure is strong and reliable, with strong anti-tampering performance.
• Each slot has precise cutout and reserved in an Arc-outlet on the edge.

• if you didn't know how to do wiring and pinning and receptacles,then it would be a very wise choice to choose this fuse and relay box,all you will need to do is connect to the corresponding spot on the power bar and run you lead to the load.